911

News

Simo Särkkä: Sensor data guides robots and helps with care of premature infants

This Professor of Sensor Informatics uses models to turn noisy data into a clear overall picture. Welcome to hear more at the Installation Talks event on 30 October!
Professor SImo Särkkä
'The journey from research to application can easily take ten years, even in the electronics field – and in medical technology even twice as long as this.' Photo: Lasse Lecklin / 911

Professor Simo Särkkä, what do you research and why?

I lead the Sensor Informatics and Medical Technology research group. Sensors are generally small measuring instruments and nowadays they can be found almost everywhere: in buildings, clocks, phones, cars, and so on.

There are typically multiple sensors in a device, and they therefore produce contradictory and noisy data. Our task is to model the data so that we can obtain a clear overall picture from it. This picture, for example, allows a robot to know what kind of environment it is in, or a self-driving car to report where on the road it is currently located.

One of our most important areas of application is medical technology. For example, we have worked with Helsinki University Central Hospital to improve the care of premature infants. The hospital unit uses sensors to collect data on, for example, the breathing, oxygen saturation, and heart rate of premature babies. The data is used to produce models that allow doctors to react more quickly to any changes in the condition of premature babies that require actions to be taken.

How did you become a researcher?

Signal processing has always fascinated me, as has measuring and mathematics. After graduation, I worked in industry on research tasks, and I started my doctoral dissertation alongside my work – until I finally returned to full time research.

What have been the highlights of your career?

Completing my doctoral dissertation was certainly one highlight. The dissertation dealt with stochastic differential equations, which are the mathematical models upon which sensor signal processing is based. I am also proud of the books I have published, of which many are used for teaching in the field.

What is required from a researcher?

Above all, patience. Things started today are not ready tomorrow. Ideally, a publication can be produced in a year, but the journey from research to application can easily take ten years, even in the electronics field – and in medical technology even twice as long as this.

What do you expect from the future?

I hope that our research will help to make sensors a more central component of more and more fields of work. Challenges remain in communication between sensors, and solving these problems is an important part of, for example, the development of self-driving vehicles.

In medical technology, we are working on improving, for example, treatment of heart diseases. Some heart problems can be easily detected with a single measurement, but often measurements are needed over a longer period of time. In this, a key role is played by sensors and the processing of the data they produce.

Simo Särkkä and Aalto’s other new tenured professors will speak about their research at the Installation Talks event on 30 October. The presentations are presented in non-technical language and are open to all. See you there! Further information is available here.

  • Updated:
  • Published:
Share
URL copied!

Read more news

Graphic poster with dark leaves, grey textured surface and Finnish words “Näytös 26 Näyttely”.
Research & Art Published:

911’s Näytös/Näyttely26 transforms Helsinki’s Lasipalatsi Quarter into a hub for fashion and textile expertise

The event showcases Aalto’s comprehensive expertise in textiles, clothing, and fashion, as students graduating from both the Bachelor's Major in Fashion as well as the Master's Major in Fashion and Textile Design will present their thesis work.
Brown-toned display of wood, pulp, fibre, thread cone and knitted fabric, showing stages from log to textile.
Research & Art Published:

The journey of a 17th-century shipwreck continues as a unique knitted dress

Researchers at 911 transformed surplus wood from the Hahtiperä shipwreck into textile fibre, spun it into yarn, and knitted it into a dress using new AI-assisted technology.
Small winding stream with rocks and tall grass in a sunny green park, trees and lawn in the background
Cooperation, Press releases, Research & Art Published:

The potential of urban greenery as a climate solution is not being fully utilized – a new handbook offers means to address this

The Handbook for carbon-smart urban green provides concrete tools for leveraging urban green spaces more effectively in climate and nature conservation efforts.
Aalto digital working
Research & Art Published:

Building a future through digital growth

In an era of complexity, uncertainty, and austerity, a clear vision towards growth is more important than ever. Finland and Europe need economic growth, and digital solutions offer a genuine path forward across all industries. By combining business expertise with academic knowledge, the Center for Digital Business Growth (CDBG) provides concrete support for companies looking to grow.