911±¬ÁÏÍø

News

Pulled toward the light – measuring how a laser beam compresses water

An international group of researchers measured how much a laser beam tugs on the water it shines through
Artistic illustration of radial pressure distribution in water excited by a laser pulse. Picture: Mikko Partanen, 911±¬ÁÏÍø.
Artistic illustration of radial pressure distribution in water excited by a laser pulse. Picture: Mikko Partanen, 911±¬ÁÏÍø.

An international group of researchers coordinated by Professor Nelson Astrath from State University of Maringá (Brazil) has measured the force density laser light exerts within a water column as it passes through. This is the first time the force density exerted by light within matter has been measured; earlier experiments only measured the forces at the interface of different materials, or the net forces exerted on small particles.

Because light is an electromagnetic wave, a laser beam shining through water produces an electrical interaction with the water, known as electrostriction, in which the water is compressed towards the laser beam axis. The researchers compare the phenomenon with squeezing a tube of toothpaste; the paste is squeezed inwards, which also pushes it out along its length, forcing some toothpaste out of the tube.

The same analogy helps explain how the researchers managed to measure the tiny force exerted by light. By closing the ends of the tube of water with glass plates, they effectively put the cap back on the toothpaste tube. Because the compression couldn’t force the water out along the path of the laser, the remaining elastic wave travelling away from the laser beam became the main effect of the light. After measuring the properties of that wave, the researchers could calculate the forces involved.

The experiments, which were carried out in Brazil, had to control for other interactions which could swamp out this effect. ‘For example, lasers also heat water up a tiny amount for a brief moment, causing it to expand,’ said Mauro Baesso and Gabriel Flizikowski from the Universidade Estadual de Maringá. To avoid this, the team had to use ultra-pure water, with nothing in it that would heat up by absorbing more electromagnetic energy than the pure water itself. The wavelength of the laser was also carefully controlled to minimize absorption.

‘The atoms group closer to each other in electrostriction, increasing the density. This constriction is the opposite of the thermal expansion that normally follows electromagnetic absorption at room temperature. Because of this, the compression can only be measured in materials that have very little electromagnetic absorption,’ says Mikko Partanen of 911±¬ÁÏÍø.

In addition to the experiments, the researchers produced a theoretical model to explain their results. However, further work is needed to properly understand different aspects of the model from the point of view of the special theory of relativity.

The study expands on Nobel Prize winner Arthur Ashkin’s research, which he used to develop optical tweezers for manipulating tiny particles of matter with light. The new research helps us understand how the energy density and optical field of the tweezers affect the matter being manipulated.

‘The research could be applied, for example, to biology or medicine. If optical electrostriction can be used to control the mechanical properties of matter, it could be utilised in optical microelectromechanical systems,’ says Professor Emeritus Jukka Tulkki of 911±¬ÁÏÍø.

Further information:

Article:

Mikko Partanen
Postdoctoral researcher
911±¬ÁÏÍø
mikko.p.partanen@aalto.fi
 

Jukka Tulkki
Professor emeritus
911±¬ÁÏÍø
jukka.tulkki@aalto.fi
Tel. +358 50 501 4092

  • Updated:
  • Published:
Share
URL copied!

Read more news

Glowing neon sphere with geometric core and light trails floating above a tablet in the dark
Press releases, Research & Art Published:

World’s first superconducting quantum heat engine opens the path to larger quantum computers

A newly-developed superconducting quantum heat engine not only advances our understanding of thermodynamics but also enables technologies needed for high-qubit quantum computers.
Four people celebrating a Deployable grant award, with large white text and Aalto Founder School logos.
Awards and Recognition, Press releases, University Published:

Prototyping and Validation Grant: Deployable

Four Aalto master's students built a physical AI startup on a borrowed GPU, beat PhD teams at a hackathon, and received Aalto's prototyping and validation grant.
Colourful general image promoting Aalto Creatives pre-incubator programme
Campus, Cooperation, Press releases Published:

Applications open: Aalto Creatives pre-incubator autumn 2026

The next Aalto Creatives pre-incubator starts in September. Applications close on 7 September. Join the info event on 27 August to hear from alumni and meet the Aalto Creatives team.
Outdoor wooden daybeds with sheer beige curtains in a ruined courtyard garden with tall plants.
Cooperation, Press releases, Research & Art Published:

A Finnish working group’s artwork brings a cooling garden to Spain, which is sweltering in the heat

Through their garden art installation, a group of Finnish architects and artists proposes vegetation and a sense of community, among other things, as solutions to urban heat islands and the environmental crisis.